[cisco-voip] Echoes (echo-cancel coverage)

[Steve G]

When I install I usually set my echo cancel coverage to 32 ms on the
voiceport.  Are we talking PRI or Analog lines?

On 3/16/07, Johan Bloemhard <bloemhard_johan at silverfalls.k12.or.us> wrote:
>
> Ver. 12.4(10). I upped the default setting to max of 64 ms.
>
> Johan Bloemhard
>
> - Sent from my handheld.
>
> -----Original Message-----
> From: "Lemon" <lemon at lemon.za.net>
> To: "Johan Bloemhard" <bloemhard_johan at silverfalls.k12.or.us>
> Cc: "cisco-voip at puck.nether.net" <cisco-voip at puck.nether.net>
> Sent: 3/16/07 12:06 AM
> Subject: Re: [cisco-voip] Echoes (echo-cancel coverage)
>
> On 3/15/07, Johan Bloemhard <bloemhard_johan at silverfalls.k12.or.us> wrote:
> >
> > I have reports of IP users experiencing intermittent echo problems on IP
> > <-> PSTN.  I looked at my 2801 and I'm seeing that echo-cancel coverage
> > is set to 8 ms.
> >
> > Will changing this help my problems?  Will there be any bad effects of
> > raising this to 64 or 128?
> >
> >
> What IOS are you running?
>
> Thnx
>
> Charl
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070318/222477e2/attachment-0001.html