[cisco-voip] can't make outgoing calls (urgent help needed)
Cathy Cheng
cchengcc at gmail.com
Wed Mar 21 20:45:08 EST 2007
Inbound call is OK, can't make outgoing calls
The following is the debug info from the voice gateway.
Any idea? Appreciate any input.
ROUTER#debug isdn q931
debug isdn q931 is ON.
ROUTER#ter monitor
ROUTER#
*Mar 22 10:45:48.322 AEST: ISDN Se0/1/0:15 Q931: Applying typeplan for
sw-type 0x12 is 0x0 0x0, C
alling num 65828100
*Mar 22 10:45:48.322 AEST: ISDN Se0/1/0:15 Q931: Applying typeplan for
sw-type 0x12 is 0x0 0x0, C
alled num 0434601677
*Mar 22 10:45:48.326 AEST: ISDN Se0/1/0:15 Q931: TX -> SETUP pd = 8 callref
= 0x0091
Sending Complete
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA9838A
Exclusive, Channel 10
Calling Party Number i = 0x0081, '65828100'
Plan:Unknown, Type:Unknown
Called Party Number i = 0x80, '0434601677'
Plan:Unknown, Type:Unknown
*Mar 22 10:45:48.406 AEST: ISDN Se0/1/0:15 Q931: RX <- CALL_PROC pd =
8 callref
= 0x8091
Channel ID i = 0xA9838A
Exclusive, Channel 10
*Mar 22 10:45:48.410 AEST: ISDN Se0/1/0:15 Q931: RX <- PROGRESS pd = 8 callref
= 0x8091
Progress Ind i = 0x8482 - Destination address is non-ISDN
Progress Ind i = 0x8488 - In-band info or appropriate now available
*Mar 22 10:46:17.049 AEST: ISDN Se0/1/0:15 Q931: TX -> DISCONNECT pd =
8 callref
= 0x0091
Cause i = 0x8090 - Normal call clearing
*Mar 22 10:46:17.113 AEST: ISDN Se0/1/0:15 Q931: RX <- RELEASE pd = 8 callref
= 0x8091
*Mar 22 10:46:17.117 AEST: ISDN Se0/1/0:15 Q931: TX -> RELEASE_COMP pd
= 8 callref
= 0x0091
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070322/01672ec0/attachment.html
More information about the cisco-voip
mailing list