[cisco-voip] Resetting this godforsaken 7960
Ahmed Elnagar
aelnagar at ACT-EG.COM
Thu Mar 22 03:11:09 EST 2007
Hello;
I could answer u in the manual configuration part. first u should unlock the setting of the phone this is done by pressing **# after pressing the setting key, then you must set the DHCP enabled (option number 30 ) to no then now you can give the phone and IP address and give it the tftp server.
Thanks and Best Regards
Ahmed A. Elnagar
Network Field Engineer
Advanced Computer Technology (ACT)
16 Fawzy Ramah St.Off Shehab St.Mohandessin, Giza, Egypt
Postal Code:12411 Cairo Egypt
Mob: +2010-2833868
Website: www.act-eg.com
E-mail: aelnagar at act-eg.com
________________________________
From: cisco-voip-bounces at puck.nether.net on behalf of J. Oquendo
Sent: Tue 20-Mar-07 8:38 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Resetting this godforsaken 7960
So I go to reset this 7960 to factory default (it was a leftover from an
install).
Hold the # key during bootup...
1 2 3 4 5 6 7 8 9 * 0 #
Do you want to save... No...
Configuring VLAN
TFTP File not found...
Did I miss something. Why is the 7960 trying to obtain VLAN information.
Why am I
not able to manually enter DHCP information and specify my own TFTP
location...
--
====================================================
J. Oquendo
http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x1383A743
sil . infiltrated @ net http://www.infiltrated.net <http://www.infiltrated.net/>
The happiness of society is the end of government.
John Adams
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070322/0afef3c3/attachment-0001.html
More information about the cisco-voip
mailing list