[cisco-voip] VG 224 SCCP and H323 Mixed Mode

[Ed Leatherman]

We're running some fax machines and alot of analog phones at a regional
campus using vg224 in sccp mode and haven't run into any problems with using
sccp (yet). Don't have any experience running the ports in h323 mode,
haven't had to resort to that.

On 3/22/07, Kalle Tetto <tettokalle at hotmail.com> wrote:
>
> Hi all,
>
> I have an VG224 with modem, faxes and analog phones. As far as I can see
> now, the only way to configure the VG224 is SCCP mode, because I will
> have to use forward, pickup and transfer.
>
> For the modem and fax ports, should I now configure SCCP or H323.
>
> What are your experiences with SCCP and modems, FAX?
>
> If I configure the ports of the VG224 which will be connected to fax and
> modems using H323, i can use modem and fax passthrough. what would the
> configuration looks like?
>
> Do I have to register the the VG224 as H323 gateway and SCCP gateway?
>
> I know, alot of question, but hopefully you have more experience in
> VG224 than me.
>
> Cheers
> Christian
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>



-- 
Ed Leatherman
Senior Voice Engineer
West Virginia University
Telecommunications and Network Operations
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070322/c3ec8c42/attachment.html