[cisco-voip] NM-8B-S/T Voice Ready?

[Jason Aarons (US)]

It was developed before the ISR era. This part is likely more than 5
years old.

There are descriptions of end of life 3725 dial bundles on CCO with
those cards. You could network up to 8 sites at 128K!

Since it doesn't indicate usage with a a NM-HDV (the 2600 era voice dsp)
I believe the intent was data/dial not voice, thus it won't recognize
the PVDMs onboard the ISR.

http://www.cisco.com/en/US/products/hw/routers/ps274/products_tech_note0
9186a00800a4b8e.shtml


-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Kalle Tetto
Sent: Saturday, March 24, 2007 5:19 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] NM-8B-S/T Voice Ready?

Hi,

I have an NM-8B-S/T, is this Network module capable of voice?

I have inserted this module into a 2811 Router, with IOS 12.4 9T. I 
don't get any voice-ports? Do I configure something wrong, or is the 
card simply not capable for voice?

Many thanks

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.