[cisco-voip] HQ CCM keep on receiving transient connection from Remote VG224

[wong cf]

Hi Support

I have installed a VG224, it is connected back to CCM across the WAN by
using SCCP protocol. Initially i configured first port for the analog phone
and working fine. After that my customer wants me to configure extra 10
ports for them to do plug-and-play if they need to.

After those ports been successfully configured, CCM from HQ keep receiving
transient connection massages from the event log.

Then i try to delete those DN configuration from CCM's Gateway
configuration, as well as shutdown those voice ports from VG224 using IOS
command line, but messages still receiving.

Can help me to verify what happen?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070326/69c74386/attachment.html