[cisco-voip] CME Overflow

[Johnny Crothers]

Could just be a brain clog.. but

 

Customer is running CME with 7912's, they have a reception phone, which
when unmanned they would like the call presented to all users in the
office. 

 

Because 7912's are used, there is only 1 line appearance, so a shared
line appearance wont work. Hunt Groups have been suggested but they want
all phones to ring.... 

 

If there any possible scenario where this could be configured to work?

 

Thanks!!

 



**********************************************************************
Any opinions expressed in the email are those of the individual and not necessarily the company. This email and any files transmitted with it are confidential and solely for the use of the intended recipient.  If you are not the intended recipient or the person responsible for delivering it to the intended recipient, be advised that you have received this email in error and that any dissemination, distribution, copying or use is strictly prohibited.

If you have received this email in error, or if you are concerned with the content of this email please e-mail to: e-security.support at vanco.info

The contents of an attachment to this e-mail may contain software viruses which could damage your own computer system. While the sender has taken every reasonable precaution to minimise this risk, we cannot accept liability for any damage which you sustain as a result of software viruses. You should carry out your own virus checks before opening any attachments to this e-mail. 

Vanco UK Ltd Registered in England No: 2296733 Registered Office: John Busch House, 277 London Road, Isleworth, Middlesex TW7 5AX
**********************************************************************

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070326/6e40aacb/attachment-0001.html