[cisco-voip] Unity 4.2 > Subscriber > Caller Input > *T

[Ed Leatherman]

Could you have input for * send to another callhandler with no greeting and
caller input on the 8 key to send it to the secretary? kinda ugly way to do
it though.

On 3/29/07, Jason Aarons (US) <jason.aarons at us.didata.com> wrote:
>
>  A customer has a current voicemail that during a subscribers voicemail
> greeting you can press *T to transfer to their secretary.
>
>
>
> I found Unity Caller Input only allows a single character, any known
> workarounds? I'm thinking just T (number 8) without the *   -jason
>
> ------------------------------
>
> * Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee, you
> are hereby notified that you have received this communication in error and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this communication in
> error, please notify us immediately by replying to this message and deleting
> it from your computer. Thank you. *
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>


-- 
Ed Leatherman
Senior Voice Engineer
West Virginia University
Telecommunications and Network Operations
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070329/8c32fc37/attachment-0001.html