[cisco-voip] devpack vs .EXE vs. ZIP

[Lelio Fulgenzi]

i've never had to bounce the tFTP server after copying over ZIP files. 

--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
...there's no such thing as a bad timbit...

  ----- Original Message ----- 
  From: Voll, Scott 
  To: Lelio Fulgenzi ; cisco-voip at puck.nether.net 
  Sent: Monday, May 07, 2007 4:45 PM
  Subject: RE: [cisco-voip] devpack vs .EXE vs. ZIP


  Personally I like the Zip.  I unpackage them, insert, bounce the TFTP, setup the device defaults and I'm good.  The EXE requires a reboot.

   

  Scott

   


------------------------------------------------------------------------------

  From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
  Sent: Monday, May 07, 2007 1:32 PM
  To: cisco-voip at puck.nether.net
  Subject: [cisco-voip] devpack vs .EXE vs. ZIP

   

  Do I need a devpack to run my 7911s? Or can I just download the zip files? What do the devpacks do?

   

  The readme for 8.2(2) SR2 says the following. But the 7911 is running fine with SCCP11.7-2-3S (whatever that is)

   

   

    http://ftp-sj.cisco.com/cisco/voice/ip-7900ser/cmterm-7911_7906-sccp.8-2-2SR2-readme.htm

     

    Table 1: Compatible Cisco Unified Call Manager Release for 7911G (No support for 7906G in these releases)

     

        Call Manager Version
       Executable on Software Page
       
        3.3(5)SR1 or later & ciscocm.3-3-DevPack-64.exe
       ciscocm.3-3-5-sr1.exe; ciscocm.3-3-DevPack-64.exe
       
        4.0(2)SR2b or later & ciscocm.4-0-DevPack-43.exe 
       ciscocm.4-0-2a-sr2b.exe; ciscocm.4-0-DevPack-43.exe
       
        4.1(3)SR1 or later & ciscocm.4-1-DevPack-23.exe
       ciscocm.4-1-3-sr1.exe; ciscocm.4-1-DevPack-23.exe
       

  Table 2: Compatible Cisco Unified Call Manager Release that supports both 7906G and 7911G

        Call Manager Version
       Executable on Software Page
       
        3.3(5)SR2 or later & ciscocm.3-3-DevPack-68.1.exe or later
       ciscocm.3-3-5-sr2.exe; ciscocm.3-3-DevPack-68.1.exe
       
        4.1(3)SR3a or later & ciscocm.4-1-DevPack-28.2.exe or later
       ciscocm.4-1-3-sr3a.exe; ciscocm.4-1-DevPack-28.2.exe
       
        4.2(1)SR1 or later & ciscocm.4-2-1-DevPack-03.3.exe or later
       ciscocm.4-2-1-sr1.exe; ciscocm.4-2-1-DevPack-03.3.exe
       

   

   

  --------------------------------------------------------------------------------
  Lelio Fulgenzi, B.A.
  Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
  (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
  ...there's no such thing as a bad timbit...
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070507/37e506ea/attachment-0001.html