[cisco-voip] CCM 4.2: Configure "monitor"-Buttons on 7910

Ahmed Elnagar aelnagar at ACT-EG.COM
Tue May 8 04:10:00 EDT 2007


unfortunatly not supported, I opened cases with cisco and alot of search with no benefit. But alot of third party applications do it see berbee if they have one also check this site http://ipcelerate.com/ 
 
Thanks and Best Regards

Ahmed A. Elnagar
Network Field Engineer
 
Advanced Computer Technology (ACT)
16 Fawzy Ramah St.Off Shehab St.Mohandessin, Giza, Egypt 
Postal Code:12411 Cairo Egypt

Mob: +2010-2833868
Website: www.act-eg.com
E-mail: aelnagar at act-eg.com

________________________________

From: cisco-voip-bounces at puck.nether.net on behalf of Jörg Wesely
Sent: Mon 07-May-07 11:01 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CCM 4.2: Configure "monitor"-Buttons on 7910



Hi,

on CCME, I can configure "Monitor"-Buttons, that means a
speeddial-button that also gets lit when the line is in use.

Is it possible to achieve the same on a CCM 4.2 system?

Regards

Jörg

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070508/d927303a/attachment.html 


More information about the cisco-voip mailing list