[cisco-voip] callerID is missing on plar connection

gokhan senol gokhanciscottl at yahoo.com
Thu May 10 04:37:54 EDT 2007


hi 
i know here is ccm group but i need help about an issue  related to  ccme 


2851 ccme 3.3 
manager has direct analogue line. For this i configured plar connection on fxo port for his second line. 
he can receive calls from this analogue line and he can also call outside from this line. 
config is below 
problem is CallerID is missing for incoming calls .on phone display unknown number. 
i directly connected analgue phone to the line and checked if the telco sends callrID . it is ok. on my cell phone i saw the callerID.  
but when i connected it to the fxo port and made plar connection callerID is missing.


voice-port 0/2/3 
description plar to ephone63 button2
timeouts wait-release 3 
connection plar opx 99 
caller-id enable 

!
dial-peer voice 800 pots
 incoming called-number .
 port 0/2/3
!
dial-peer voice 801 pots
 destination-pattern 801
 port 0/2/3
!

ephone-dn 2 
number 99 
pickup-group 14 
label direct line 
hold-alert 30 originator 
trunk 801 timeout 10 

ephone 63 
ephone-template 1 
mac-address 0019.2F3A.2807 
type 7940 
button 1:12 2:2 

thanks a lot 


any idea? 
thanks 
Gokhan

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070510/17954eae/attachment.html 


More information about the cisco-voip mailing list