[cisco-voip] Automatic CFAll?

[Gareth Cafirma]

Thanks Ed,

I have read the documents about time of day and time schedule, but from what
I understand it restricts calls and forwarding option if time schedule is in
place, but where to the forwarding to AA takes place?

G


On 5/10/07, Ed Leatherman <ealeatherman at gmail.com> wrote:
>
> Could use time of day based routing to send calls to the auto attendant
> after 6PM and then back to the operator's phone at whatever time in the
> morning. The operator would still have to remove the forwarding on their set
> in the morning when they get in, so it wouldnt go to the nighbell.
>
> This doesn't really change the call forwarding settings but i think it
> would have the effect you want.
>
>  On 5/9/07, Gareth Cafirma < garethsc at gmail.com> wrote:
>
> >  Hello Guys,
> >
> > Is it possible to do a "automatic" call forward all to an auto
> > attendant? The client has a 5.1 CCM, unity connection 1.2. Here is the
> > scenario, operator leaves her desk and forward all calls to the nightbell,
> > after 6 PM, they want to remove the forward to nightbell and forward it to
> > auto attendant instead.
> > Can this be done? Any suggestions will be appreciated.
> >
> > Gareth
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
>
>
> --
> Ed Leatherman
> Senior Voice Engineer
> West Virginia University
> Telecommunications and Network Operations
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070510/7d83cc96/attachment.html