[cisco-voip] IOS strip digits from 8 to 4

[Jonathan Charles]

On the inbound peer

incoming called-number ....



Jonathan

On 5/9/07, Jason Aarons (US) <jason.aarons at us.didata.com> wrote:
>
>  Telco is delivering 8 digits in Malaysia, I only need 4 digits
> significant.  I don't want to ask them to change from 8 digits to 4.
>
>
>
> This is all h323 dial-peers, some DIDs go to CallManager, some DIDs go to
> CVP, etc. I can't use MGCP or do a translation-pattern in CCM.
>
>
>
> How best should I reduce the 8 digits received to 4 via IOS Gateway?
>
>
>
> DID Range 8808-87XX
>
>
>
> num-exp 880887.. ….
>
>
>
>
>
> Jason Aarons
>
> Consultant
>
> http://www.dimensiondata.com/na
>
> 904-338-3245 cell
>
>
>
> For urgent issues notify your Project Manager, for 24x7 support contact
> the Dimension Data NOC at 800-974-6584.
>
>
>
> ------------------------------
>
> * Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee, you
> are hereby notified that you have received this communication in error and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this communication in
> error, please notify us immediately by replying to this message and deleting
> it from your computer. Thank you. *
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070510/37563a09/attachment-0001.html