[cisco-voip] Difference between these two

Jason Aarons (US) jason.aarons at us.didata.com
Thu May 10 21:13:19 EDT 2007


Can anyone clarify the differences between the two sets of commands
below?

 

Newer config 12.4.11.T2

voice service voip

   h323

       call preserve

 

 

Older running-config 12.4.4XC2

voice class h323 1

   h225 timeout tcp establish 0

      call preserve

 

 

 

Jason Aarons

Consultant

http://www.dimensiondata.com/na <http://www.dimensiondata.com/na> 

904-338-3245 cell

 

For urgent issues notify your Project Manager, for 24x7 support contact
the Dimension Data NOC at 800-974-6584.

 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070510/6e5158e0/attachment.html 


More information about the cisco-voip mailing list