[cisco-voip] Anyone used the WIC-1AM for managing remote router ?

[Jason Aarons (US)]

Can anyone attest to using the WIC-1AM for managing a router?

 

From: Nick Monfreda (US) 
Sent: Friday, May 11, 2007 12:10 PM
To: 
Subject: RE: ISR Question

 

Will this part work?

 

WIC-1AM

 

 

________________________________

From: Jason Aarons (US) 
Sent: Friday, May 11, 2007 12:00 PM



 

Yes but it's expensive.  I recall it's like a WIC-AM (analog modem). For
single device use the USR5686E or like.

http://www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a0
0800941c9.shtml

 

 

 

For large data center we used the 2511, it's EoL, replaced with a
AS2511-RJ, I think.

 

Also the Digi PortServer TS 16 is really cheap. Single modem can control
up to 16 ports.

 

Question:

I am having a brain freeze. 

 

Does Cisco have a module that can plug into an ISR 2800 that has a modem
port that someone can dial into that will allow remote management of the
router if the WAN goes down? 

 

 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070511/e949cefa/attachment.html