[cisco-voip] Annoying CDP message with 7941G-GE in 4.1(3)SR4d
Jason Aarons (US)
jason.aarons at us.didata.com
Sat May 12 11:45:22 EDT 2007
This is driving me crazy, any way to disable these pop ups when updating
a 7941G-GE ? Since the default is CDP enabled maybe show the popup
message when they set CDP to disabled?
Pop-Up
Cisco Discovery Protocol (CDP): Switch Port: Warning! CDP should be
disabled on the Network port if this phone is connected to a non-Cisco
switch. For futher details, consult hte Cisco CallManager
Administration Guide. Ok.
Jason Aarons
Consultant
http://www.dimensiondata.com/na <http://www.dimensiondata.com/na>
904-338-3245 cell
For urgent issues notify your Project Manager, for 24x7 support contact
the Dimension Data NOC at 800-974-6584.
-----------------------------------------
Disclaimer:
This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only. If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful. If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070512/ef3394b2/attachment-0001.html
More information about the cisco-voip
mailing list