[cisco-voip] CCM 4.2 and Off-Hook

[Ryan Ratliff]

Look at the Cisco Lines perfmon counter.  I'm not sure if it shows linestate
as much as the number of calls active.  It is organised by partition/dn, not
device. 


-Ryan 
-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of James Williams
Sent: Monday, May 14, 2007 4:23 PM
To: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CCM 4.2 and Off-Hook

> How would you need this information, and do you need it for all phones 
> at once or just arbitrary endpoints? Attendant Console can show you 
> line state of a desired IP Phone on the system, although it doesn't 
> show any call details. The attendant just has to locate them in the
directory.

The format the information is in is more or less irrelevant, as it's going
to be going to another program, where I can have it parse whatever CCM will
give it.

I realize Attendant Console provides this information, but I need to get it
another way so I can integrate that information with some other data. If I
can use the UDP transmissions that AC puts out, that would work, but I'd
need to know how the two communicate so I can "spoof" the fact that I'm not
really an AC client. Does that make sense?

-James



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip