[cisco-voip] "verifying load" Message on Phone?

[Miller, Steve]

We have a phone stuck on "verifying load".  This is a new phone which we
programmed and are attempting to register at an SRST site.  We have not
run into this problem before.   I am trying to instruct someone "on the
ground" in that location as we are 3000 miles away.  Would a factory
reset help?
 

Steve Miller
Telecom Engineer
Dickstein Shapiro LLP
1825 Eye Street NW | Washington, DC 20006
Tel (202) 420-3370 Fax (202)-330-5607
millers at dicksteinshapiro.com <mailto:millers at dicksteinshapiro.com>  

 

--------------------------------------------------------
This e-mail message and any attached files are confidential and are intended solely for the use of the addressee(s) named above. This communication may contain material protected by attorney-client, work product, or other privileges. If you are not the intended recipient or person responsible for delivering this confidential communication to the intended recipient, you have received this communication in error, and any review, use, dissemination, forwarding, printing, copying, or other distribution of this e-mail message and any attached files is strictly prohibited. Dickstein Shapiro reserves the right to monitor any communication that is created, received, or sent on its network.  If you have received this confidential communication in error, please notify the sender immediately by reply e-mail message and permanently delete the original message. 

To reply to our email administrator directly, send an email to postmaster at dicksteinshapiro.com

Dickstein Shapiro LLP
http://www.DicksteinShapiro.com
==============================================================================
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070516/fb231c4a/attachment.html