[cisco-voip] ccm4.2 video over intercluster trunk issues !!!

[Djokic Sinisa]

thanx ryan..

 

i agree with you..that's what i'm thinking also..

the problem is there shouldn't be any codec mismatch etc..

i have two separate systems - ccm4.1 and ccm4.2, which are configured
identically..

both using the same gatekeeper..

one of them works - ccm4.1..

another doesn't - ccm4.2..

all the device pools use g711 codec..

so, that's the reason i was asking have anybody experienced something like
that ( maybe it's a bug ) or something..

 

thanx..

 

regards..

 

Sinisa Djokic 

System Engineer

CCNP,CCDA,CQS-CWLDS,CS-CIPTDS,CS-CIPCCES Cisco Certified

 

MDS Informaticki inzenjering

Bul. Arsenija Carnojevica 170

11070 Novi Beograd, Serbia

Tel: +381 11 2015 200, 2015 273

Fax: +381 11 3194 954

www.mds.co.yu

sdjokic at mds.co.yu

      

-----Original Message-----
From: Ryan Ratliff [mailto:rratliff at cisco.com] 
Sent: Thursday, May 17, 2007 6:15 PM
To: Djokic Sinisa
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] ccm4.2 video over intercluster trunk issues !!!

 

When a call is dropped as soon as it goes to a connected state this  

usually indicates a codec mismatch, or some other media establishment  

error.

 

The fact that the call connects with no video when you use the MRGL  

tells me that either an MTP or transcoder is being invoked for that  

call.  Since we have no MTP or Transcoders that support video, you  

get audio only.

 

You can verify this by looking at the Perfmon counters in CCM, by  

hitting the IP phone's web page and looking at the active RTP stream  

(when the audio only call is up) to see the IP address it is sending  

RTP to, or by examining the CCM trace.

 

-Ryan

 

On May 17, 2007, at 4:01 AM, Djokic Sinisa wrote:

 

hi to all..

 

 

 

has anybody experienced the following problem:

 

 

 

ccm4.1(3) - we have gatekeeper configured on ccm and intercluster  

trunk whis is controlled via that gatekeeper ( GNU )..

 

there is also a route pattern for certain video calls to go from CCM  

side over that intercluster trunk to TANDBERG video terminal ( which  

is registred to the same GNU gatekeeper )..

 

the phone and the intercluster trunk are in the same device pool  

( g711 )..

 

when user  ( with IP phone and VTA ) makes a call to that video  

number and succesfull video call is established..

 

no media resource group list are used at all..

 

 

 

ccm4.2(1) - the same setup as before is copied to the new CCM 4.2 in  

lab..

 

everything is the same ( including the same gatekeeper ) but it  

doesn't work..

 

there are two things..

 

if we put that device pool ( the one we're using ) uses media  

resource group list a call is established but without video..

 

if we don't put that device pool ( the one we're using ) uses media  

resource group list a call is droped as soon it is established..

 

 

 

 

 

 

 

does anybody have an idea about this strange behaviour..

 

is there something we should know about CCM4.2 or is it u bug..

 

 

 

regards..

 

 

 

Sinisa Djokic

 

System Engineer

CCNP,CCDA,CQS-CWLDS,CS-CIPTDS,CS-CIPCCES Cisco Certified

 

 

 

<image001.gif>

 

 

 

MDS Informaticki inzenjering

Bul. Arsenija Carnojevica 170

11070 Novi Beograd, Serbia

Tel: +381 11 2015 200, 2015 273

Fax: +381 11 3194 954

www.mds.co.yu

sdjokic at mds.co.yu

 

 

 

<image001.gif>

_______________________________________________

cisco-voip mailing list

cisco-voip at puck.nether.net

https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070518/fa7d3da0/attachment-0001.html