[cisco-voip] CFwdALL and get That Key is Not Active (7961 > 4.1(3)with load 8.2(2)SR1S)

[Sumit Marwah]

This can only be done from the ccmuser page. By default the CFwdALL
button is only available for the primary line, i.e. line 1. 

 

Maybe there is a system parameter that can be changed, not sure on that
one.

 

Regards,

 

Sumit Marwah 
Sr. System Engineer
CCIE Voice # 17400

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jason Aarons
(US)
Sent: Tuesday, May 22, 2007 1:31 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CFwdALL and get That Key is Not Active (7961 >
4.1(3)with load 8.2(2)SR1S)

 

I press Line 5 on a 7961 and CFwdALL and get That Key is Not Active
here.

 

Line 5 has a good Calling Search Space, maybe there is a enterprise
parameter that was added in 4.x? 

 

This used to work in 3.x (forward on per line). CFwdALL works for line 1
but not lines 2-6 on the 7961....

 

 

________________________________

Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee,
you are hereby notified that you have received this communication in
error and that any use or reproduction of this email or its contents is
strictly prohibited and may be unlawful. If you have received this
communication in error, please notify us immediately by replying to this
message and deleting it from your computer. Thank you. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070522/4b6fca31/attachment-0001.html