[cisco-voip] Catalyst 6500 switch as Voice Gateway

Voll, Scott Scott.Voll at wesd.org
Fri May 25 13:35:58 EDT 2007


How many PRI's are you looking for?  An ISR might be cheaper.

Note. I do have a CMM with 6 PRI and ACT card.

Scott

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Paul Choi
Sent: Friday, May 25, 2007 10:22 AM
To: zohaib shabir; cisco-voip at puck.nether.net;
cisco-voip-request at puck.nether.net
Subject: Re: [cisco-voip] Catalyst 6500 switch as Voice Gateway

Yes. Just put a fat CCM blade in the box and you can
use it as a VoIP interface.

Paul

--- zohaib shabir <zohaibshabir at gmail.com> wrote:

> Dear All,
> Can we use Catalyst 6500 series switch as Voice
> gateway.
> 
> -- 
> Regards,
> Zohaib Shabir
> Network Engineer(Voice and PreSales)
> DWP Group, TECH Division
> Ph:+92-302-8232689
> > _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 



       
________________________________________________________________________
____________Got a little couch potato? 
Check out fun summer activities for kids.
http://search.yahoo.com/search?fr=oni_on_mail&p=summer+activities+for+ki
ds&cs=bz 
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


More information about the cisco-voip mailing list