[cisco-voip] Catalyst 6500 switch as Voice Gateway
Paul Choi
asobihoudai at yahoo.com
Fri May 25 15:03:45 EDT 2007
Lelio,
What about using multiple high density analog modules?
[is this even possible?]
24x3 = 72 FXO ports. I'm not sure that even a 3845
would be able to have three high density analog ports
on it.
Paul
--- Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
> Don't think you're gonna get 60 FXO ports on a 3845.
>
>
>
http://www.cisco.com/en/US/customer/products/ps5855/products_qanda_item0900aecd8016c487.shtml
>
> 2 x EVM-HDs with two 6FXOs give 12 FXOs (plus
> 8FXS/DID if you can use them).
>
> 4 NM-HDs with 4FXOs gives 16 FXO
>
> 4 HWIC slots with 4 FXOs gives 16FXO
>
> 44 FXO at most from what I can see.
>
>
> You're better off convincing them to go with
> digital. Worse comes to worse you can use seperate
> RTM groups for each LDN coming into the trunk so
> each line can only accept one call.
>
>
>
--------------------------------------------------------------------------------
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph *
> Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
>
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>
> "Buffalo buffalo Buffalo buffalo buffalo buffalo
> Buffalo buffalo." WJR
>
> ----- Original Message -----
> From: zohaib shabir
> To: Lelio Fulgenzi
> Cc: cisco-voip at puck.nether.net ;
> cisco-voip-request at puck.nether.net
> Sent: Friday, May 25, 2007 1:33 PM
> Subject: Re: [cisco-voip] Catalyst 6500 switch as
> Voice Gateway
>
>
> Thanks for the reply,
> Problem for me is my client wants 60 FXO ports per
> router i cannot do even through 3845. Please advise
> me which way to go
>
>
> On 5/25/07, Lelio Fulgenzi < lelio at uoguelph.ca>
> wrote:
> sure, you can use the CMM modules with FXO or
> PRI ports.
>
> take a serious look at comparing the cost of the
> blades with an ISR though.
>
> you'll be surprised as to how much cheaper it
> can be.
>
> and you'll get to use the ISR for all sorts of
> other stuff like SRST. granted you can use the CMM
> for SRST but it is limited in memory.
>
>
>
>
--------------------------------------------------------------------------------
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph *
> Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
>
>
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>
> "Buffalo buffalo Buffalo buffalo buffalo buffalo
> Buffalo buffalo." WJR
>
> ----- Original Message -----
> From: zohaib shabir
> To: cisco-voip at puck.nether.net ;
> cisco-voip-request at puck.nether.net
> Sent: Friday, May 25, 2007 1:04 PM
> Subject: [cisco-voip] Catalyst 6500 switch as
> Voice Gateway
>
>
> Dear All,
> Can we use Catalyst 6500 series switch as
> Voice gateway.
>
> --
> Regards,
> Zohaib Shabir
> Network Engineer(Voice and PreSales)
> DWP Group, TECH Division
> Ph:+92-302-8232689
>
>
>
--------------------------------------------------------------------------
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
>
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
>
>
> --
> Regards,
> Zohaib Shabir
> Network Engineer(Voice and PreSales)
> DWP Group, TECH Division
> Ph:+92-302-8232689 >
_______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
____________________________________________________________________________________Take the Internet to Go: Yahoo!Go puts the Internet in your pocket: mail, news, photos & more.
http://mobile.yahoo.com/go?refer=1GNXIC
More information about the cisco-voip
mailing list