[cisco-voip] E1 Problem

[Jonathan Charles]

E1 CAS or E1 PRI?

If E1 CAS, it shouldn't be an issue, just allocate just those
timeslots... (maybe).

If E1 PRI, then no, cuz you need channels 15 and 30 as D-channels, and
I don't see how this could work.



Jonathan

On 5/30/07, new look <newlook110 at yahoo.com> wrote:
>
>
>
> Dear All,
> I'm appling a new Cisco IPTelephony system my voice geatway is Cisco router
> and I'm using E1 Interface
> the problem is the destance between my company and the Telecom exchange is
> about 5Km so the max bandwidth I have is 512K
> So I need to know can I use this channels only?
> what is the router configuration ?
> By the way I'm using paradyne two units 7996 (DSL/G703)
> Thanks
>
>  ________________________________
> Be a better Globetrotter. Get better travel answers from someone who knows.
> Yahoo! Answers - Check it out.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>