[cisco-voip] Pinging 6608 gateways ...

[Lelio Fulgenzi]

Pinging 6608 gateways ...I can ping connected ports no problem.

You might want to check ACLs, etc. Try pinging from the gateway of the device.

  ----- Original Message ----- 
  From: Biffle, Gerrad 
  To: cisco-voip at puck.nether.net 
  Sent: Wednesday, November 07, 2007 9:32 AM
  Subject: [cisco-voip] Pinging 6608 gateways ...


  Hoping someone currently running 6608 PRI cards can help verify something for me.  Are you able to ping your 6608 ports when they show a "connected" state?  This is when they are registered with the CallManager, D-channel is up and everything is running as it should.  We do not receive a reply while the port is "connected".  If the port is "enabled" (meaning it is built with no cable plugged in - and not registered with CallManager) - we receive a reply to our ping.  We also receive a reply when pinging our ports setup for HW Conferencing - these also show an "enabled" state.


  If anyone is running 6608's and don't mind giving them a ping - I would be interested to see if you receive the same thing.


  Thanks in advance for the help.




        =======================================================
        Please note that email sent to and from this address is subject 
        to the North Carolina Public Records Law and may be disclosed to 
        third parties. 



------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20071107/8e74735e/attachment.html