[cisco-voip] SMDI CM 5.1 - USB only?

[Ted Nugent]

They're 100% Centrex today and this is thier existing VM system so
unfortunately it appears this is our only option unless NEC comes back
stating that we can do SIP however I'd supect even with SIP we'd
probably still need SMDI for MWI.

On Nov 7, 2007 2:20 PM, Scott Voll <svoll.voip at gmail.com> wrote:
> is there any way to send the VM through the old PBX?
>
> Scott
>
>
> On Nov 7, 2007 10:30 AM, Ted Nugent <tednugent73 at gmail.com> wrote:
> > NEC Neaxmail AD64 and the only option is apparently analog (at least
> > according to the NEC vendor), I went back to them about SIP last week
> > and I've not heard anything back.. They've contracted NEC to handle
> > the VM peice so I've really got no control and of course the system
> > has a "dual switch" integration with thier Centrex and soon to be CM.
> > From a hardware perspective I don't have much flexibilty with this
> > since the customer has allready purchased the vg224 for the analog VM
> > port and I'm stuck making it work. I'm a bit concerned about how this
> > is all going to work since the NEC vendor is simply going to split the
> > SMDI (serial splitter) between Centrex and CM so if that will even
> > work I'm stuck using all the settings currently configured for Centrex
> > and praying I can tweak CMI enough to make it work. Any feedback is
> > welcome.
> >
> >
> >
> > On Nov 7, 2007 11:50 AM, Scott Voll <svoll.voip at gmail.com> wrote:
> > > What is the VM system are you using?  any other options? Qsig / SIP /
> > > PIMG / Etc.?
> > >
> > >
> > > On Nov 7, 2007 8:09 AM, Ted Nugent <tednugent73 at gmail.com> wrote:
> > > > Has anyone had any luck setting up SMDI directly to CM in 5.x, I'm
> > > > running a vg224 and SMDI directly to CM is my only option? According
> > > > to the service parameters it only supports serial through USB0 or USB1
> > > > rather then the onboard com port. Is there a cisco approved USB to
> > > > serial adapter for this? If USB is my only option I'm concerned with
> > > > chasing my tail on a "SMDI issue" and having it turn out to be a
> > > > driver problem? Are there any docs out there that outline CMI
> > > > configuration on CM5.x? I've check the normal places (SRND,System,
> > > > admin guide) and this doesn't appear to be covered in any detail.
> > > > Thanks
> > > > Ted
> > > > _______________________________________________
> > > > cisco-voip mailing list
> > > > cisco-voip at puck.nether.net
> > > > https://puck.nether.net/mailman/listinfo/cisco-voip
> > > >
> > >
> >
>