[cisco-voip] SMDI CM 5.1 - USB only?

[Ted Nugent]

Thanks
found the Part number

USB-SERIAL-CA=  USB Serial Cable to Connect To Legacy VM Via SMDI



On Nov 7, 2007 3:14 PM, Wes Sisk <wsisk at cisco.com> wrote:
> yep,
> USB serial device order from cisco.
>
> /Wes
>
>
> Ted Nugent wrote:
> > Has anyone had any luck setting up SMDI directly to CM in 5.x, I'm
> > running a vg224 and SMDI directly to CM is my only option? According
> > to the service parameters it only supports serial through USB0 or USB1
> > rather then the onboard com port. Is there a cisco approved USB to
> > serial adapter for this? If USB is my only option I'm concerned with
> > chasing my tail on a "SMDI issue" and having it turn out to be a
> > driver problem? Are there any docs out there that outline CMI
> > configuration on CM5.x? I've check the normal places (SRND,System,
> > admin guide) and this doesn't appear to be covered in any detail.
> > Thanks
> > Ted
>
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
>