[cisco-voip] Call delays MGCP gateway

[Linsemier, Matthew]

If the gateway is restarted does the problem show up again (the 30
second delay?)... can you include a excerpt of your code and what
version of IOS you are running on the gateway?

We had this scenario (running with a CCM) to a lucent PBX and didn't
have this problem.

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of cisco.voip
Sent: Wednesday, November 07, 2007 9:38 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Call delays MGCP gateway

I am having an issue with our Cisco MGCP gateway 2811 PRi interface to
an 
Lucent PBX.
We have a CCM 4.2 clsuter, the initial call through the GW to a phone on
the 
PBX takes almost 30 seconds to
send the digits over the PRI to the PBX, subsequent calls from the phone
to 
the PBX are less than 1 second setup time.
Therefore, it seems the delay is on the ip side on the inital call only,

does anyone have an thoughts for checking this out.

Thanks


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
CONFIDENTIALITY STATEMENT
This communication and any attachments are CONFIDENTIAL and may
be protected by one or more legal privileges. It is intended
solely for the use of the addressee identified above. If you
are not the intended recipient, any use, disclosure, copying
or distribution of this communication is UNAUTHORIZED. Neither
this information block, the typed name of the sender, nor
anything else in this message is intended to constitute an
electronic signature unless a specific statement to the
contrary is included in this message. If you have received this
communication in error, please immediately contact me and delete
this communication from your computer. Thank you.