[cisco-voip] Sort of urgent --- can anyone help me sort out what these dial-peers are each doing??

[Tim Reimers]

I can see that 1090 and 1091 both have the control-channels on my two
PRIs listed,

But I don't know what 1092 could be accomplishing, or 2000 ??

 

2005 and 2006 I see are the way my calls are being sent onwards to each
of the CCMs.

 

I need to make some changes (insert a tcl script for ani-dnis changes)
into the default incoming call peer.

But I don't know for sure if I need to mod both 1090 and 1091??

 

It would appear so --- but is the 1092 even doing anything?

 

 

Btw- what I'm planning on inserting in the way of TCL scripts is below,
just in case anyone wants to vet those changes..

 

 

Here are the current dial-peers

 

dial-peer voice 1090 pots

 description Incoming Calls Dial Peer

 incoming called-number .

 direct-inward-dial

 port 1/1:23

!

dial-peer voice 1091 pots

 description Incoming Calls Dial Peer

 incoming called-number .

 direct-inward-dial

 port 1/0:23

!

dial-peer voice 1092 pots

 description Incoming Calls Dial Peer

 incoming called-number .

 direct-inward-dial

!

dial-peer voice 2000 voip

 description catch all dial-peer

 voice-class codec 1

 voice-class h323 1

 incoming called-number .

 dtmf-relay h245-alphanumeric

 no vad

!

dial-peer voice 2005 voip

 description calls sent to CallManagers

 preference 1

 destination-pattern [2-7]...

 progress_ind setup enable 3

 voice-class codec 1

 voice-class h323 1

 session target ipv4:10.12.1.11

 dtmf-relay h245-alphanumeric

 no vad

!

dial-peer voice 2006 voip

 description calls sent to CallManagers

 preference 2

 destination-pattern [2-7]...

 progress_ind setup enable 3

 voice-class codec 1

 voice-class h323 1

 session target ipv4:10.12.1.10

 dtmf-relay h245-alphanumeric

 no vad

 

 

Here's what I anticipate putting in:

dial-peer voice 1090 pots

 application ani-filter

 description Incoming Calls Dial Peer

 incoming called-number .

 direct-inward-dial

 port 1/1:23

!

dial-peer voice 1091 pots

 application ani-filter

 description Incoming Calls Dial Peer

 incoming called-number .

 direct-inward-dial

 port 1/0:23

!

 

# Uploads the filter one time to the router, I think

Call application voice ani_filter tftp://<mytftpserver>ani_filter.tcl 

 

# Start matching caller ID to meet conditions

Call application voice ani_filter clid ""  (traps calls with no caller
ID)

Call application voice ani_filter clid XXXYYYZZZZ  (traps calls with
some particular 10 digit number)

 

# Once the matching list has processed, reroute all matching calls to
the extension below

Call application voice ani_filter new_dest <ext to reroute calls to,
instead of the number the caller dialed> 

 

That's supposed to get things rolling to send _ALL_ calls that match to
a certain mailbox, where I'll take messages and tell people how to turn
on caller ID and call back.

 

 

I just need someone to confirm that I need to do that application
ani-filter thing to BOTH of those dial peers, and that the 1092 one is
useless, etc

 

And make any other  comments needed!

 

Thanks, Tim

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20071108/ef4cee21/attachment-0001.html