[cisco-voip] Unity Express Voicemail DID

[Manoj Kalpage]

Thank for the reply. It confirmed it is working that way but they need
geneal VM number whic directly connecting to VM and prompt user ID and
Password.


On 11/13/07, Ray Burkholder <ray at oneunified.net> wrote:
> If I remember correctly, the user should just call their own did number,
> wait for the message, hit * and then gain access to their own voicemail box
> directly.
>
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Manoj Kalpage
> Sent: Monday, November 12, 2007 12:04
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] Unity Express Voicemail DID
>
> Hi All,
> One of our client want to have DID number for check voice mail from
> out side. means when they dial this DID number it should connect to VM
> and ask user their user ID and Password. Internal voice mail extension
> is 8000. I have created ephone-dn for DID number and did call forward
> all to 8000. then it says this number does not have mail box asign....
> They use CME 4.1 with Cisco Unity 2.3.
> any information would be greatly appreciated.
>
> Best regards,
> MK
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> --
> Scanned for viruses and dangerous content at
> http://www.oneunified.net and is believed to be clean.
>
>
>
> --
> Scanned for viruses and dangerous content at
> http://www.oneunified.net and is believed to be clean.
>
>