[cisco-voip] Translation rules

[Ted Nugent]

Its a bit unclear if you're looking for inbound or outbound
translations? If you're looking for outbound translations you can just
set the external number mask on those devices to whatever you want to
send out and then set the routelist to "Use Calling Party's External
Phone Number Mask" to "ON".  If you only want to allow this for a
couple devices and have the main number set for the rest its going to
take multiple route patterns going to  seperate RLs.
If you're looking for inbound I think you're stuck filtering it
through CRS/UCCX.




On Nov 12, 2007 6:49 PM, Jordi Riba (Europe) <Jordi.Riba at eu.didata.com> wrote:
>
>
>
> Hi,
>
>
>
> I would like to know if there is any way to configure more than 16
> translation-rules.
>
>
>
> One of our customers wants to change caller id to more than 16 internal
> phones. Each private number is diferent and caller id to publish too.
>
>
>
> The only way to translate them is using one to one translation.
>
>
>
> We are using h323 gateway.
>
>
>
> Are there other options different from translation rules?
>
>
>
> Thanks,
>
>
>
> Any help will be appreciated.
>
>
>
>
>
> Jordi Riba
>
> IT / Systems Engineer
>
> Dimension Data España
>
> Tel:       +34 93 467 08 10  Ext: 825
>
> Mov:    +34 660 089 360
>
> Fax:     +34 93 487 91 71
>
> jordi.riba at eu.didata.com
>
>
>
> BARCELONA, C/ Agricultura 106  planta 1. 08019 Barcelona
>
>
>
> For further information about Dimension Data, please go to
> www.dimensiondata.com
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>