[cisco-voip] Change Call Ring Duration

[Jordi Riba (Europe)]

Hi Chris,

 

I'm using CCM 6.0 I can't find this paramenter.

 

I have just found how to change the time a phone rings before forwarding the call but this is not what I need.

 

My phones ring during about 60 seconds before ending the call. I would like to reduce it to 30 seconds. (for all the phones)

 

I thought that this should be done with T.3XX parameters, but I don't know exactly which should I use. Is it T310?

 

Thanks! 

 

Jordi!

 

 

From: Clouse, Chris [mailto:chris.clouse at berbee.com] 
Sent: martes, 13 de noviembre de 2007 1:34
To: Jordi Riba (Europe)
Subject: RE: [cisco-voip] Change Call Ring Duration

 

Service Parameter: Ring No Answer Duration

 

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jordi Riba (Europe)
Sent: Monday, November 12, 2007 5:32 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Change Call Ring Duration

 

Hi,

 

I would like to end any incoming call to my IPT system after 30 seconds if nobody answers it.

 

I mean One phone starts ringing and if nobody answers it I would like to end this call after 30 seconds. Now it takes around 60 seconds and our customer says that is too much.

 

I'm working with CCM 6.0. 

 

Any one knows which timer should I change?

 

Thanks!

 

Any help will be appreciated.

 

Jordi Riba

IT / Systems Engineer

Dimension Data España

Tel:       +34 93 467 08 10  Ext: 825

Mov:    +34 660 089 360

Fax:     +34 93 487 91 71

jordi.riba at eu.didata.com <mailto:jordi.riba at eu.didata.com> 

 

BARCELONA, C/ Agricultura 106  planta 1. 08019 Barcelona

 

For further information about Dimension Data, please go to www.dimensiondata.com <http://www.dimensiondata.com/> 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20071114/afb26b62/attachment-0001.html