[cisco-voip] strange problem in integration of Avaya G3 PBX with cisco router

[zohaib shabir]

Dear All,

I am having strange problem in connecting the Avaya PBX G3 Si V8 with Cisco
router, what is happening is that the E1 link b/w these two is going up and
down. what i see the output from the sh controller command is that the
increase in Path code Violations and Line Code violations. I have changed my
physical cabling and also the cable from the tag block to the PBX, but the
situation is unchanged. i am able to call either way from PBX to FXS phone
or from FXS phone to PBX but the call gets disconnected within 10 seconds
due to increase in Path Code Violations and Line Code Violations.

I am also attaching the running config , sh ver and sh diag output for any
possible help.

-
Regards,
Zohaib Shabir
Network Engineer(Voice)
DWP Group, TECH Division Karachi
Ph:+92-302-8232689
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20071114/9d783274/attachment-0001.html 
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: 2811voicesh-tech.TXT
Url: https://puck.nether.net/pipermail/cisco-voip/attachments/20071114/9d783274/attachment-0001.ksh