[cisco-voip] Unity 5.0 Installation

[Ed Leatherman]

In the earlier versions of Unity Connection, there was a commandline switch
you could use on the unity setup program for setting up lab-environment
installations without the platform disc, I believe it was /nopcd

Don't know if that was incorporated into Unity 5.0 or not. Also as far as I
know this is entirely unsupported by TAC, so if you setup a system like that
and put it in production they could ask you to reinstall the system with the
platform disc before they will support it.

On Nov 15, 2007 9:50 AM, Manoj Kalpage <manoj.kalpage at gmail.com> wrote:

> Hi All, I have Unity 5.0 CD but don't have Platform configuration CD.
> I am setting up my lab and having hard time to install Unity 5.0. Does
> anyone know procedure how to install Unity 5.0 on non Cisco authorized
> hardware? Any information would be greatly appreciated.
>
> Thanks,
> MK
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>



-- 
Ed Leatherman
Senior Voice Engineer
West Virginia University
Telecommunications and Network Operations
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20071115/47a4315f/attachment.html