[cisco-voip] Mobile Voice Access and Voice Connect Issue

[Jason Wydra]

BECUCM 6.0(1)
2811 IOS 12.4(13R)T

I set up four users for mobile voice access/mobile connect. I configured the
H323 gateway with the vxml application, dial peer, etc. I also set up remote
destinations, remote destination profiles, access-lists, enabled user
profile, etc..... It worked at first, I got to the IVR, but now when I dial
a users DID number I get a response from telco telling me that the area code
has changed and I need to redial. This doesn't happen when I call any of the
other non mobility users at the location in the same DID range. It seems
like the problem comes and goes too. I've been tweaking things, changing
setting and whatnot for a few hours now but I'm getting the same result on
all four users. I'm getting ready to rip out the entire mobile
access/connect config but I thought I would ping you all first. Thanks in
advance!!

Jason
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20071115/053b91eb/attachment.html