[cisco-voip] Alerting name massive update !!!

[Jonathan Charles]

Do a device report... that will give you the device name and the
description (if you uses the user as the description)... and then you
can alter those results into a CSV and then BAT in the alerting
name...



Jonathan

On Nov 26, 2007 3:21 AM, Djokic Sinisa <sdjokic at mds.co.yu> wrote:
>
>
>
>
>
>
> hi to all..
>
>
>
> does anybody know is there any quick solution to add "Alerting name" to
> device line..
>
> let's presume that we have a list of 1000 "Alerting name" records we want to
> add..
>
>
>
> as i can see, using BAT we can only update directly which means – device by
> device..
>
> deleting and inserting record in BAT is not solution..
>
>
>
> is there any direct access to the database or trick to do this "dirty
> physical work"..
>
>
>
>
>
> thanx..
>
>
>
>
>
> regards..
>
>
>
> Sinisa Djokic
>
> System Engineer
>  CCNP,CCDA,CQS-CWLDS,CS-CIPTDS,CS-CIPCCES Cisco Certified
>
>
>
>
>
>
>
>
> MDS Informaticki inzenjering
>  Bul. Arsenija Carnojevica 170
>  11070 Novi Beograd, Serbia
>  Tel: +381 11 2015 200, 2015 273
>  Fax: +381 11 3194 954
>  www.mds.co.yu
>  sdjokic at mds.co.yu
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>