[cisco-voip] No. of IP Phones in CME or SRST
Voice Noob
voicenoob at gmail.com
Mon Nov 26 10:58:13 EST 2007
But you can't add more ephones than what the router supports.
So you can't go into telephony-service and put in max-ephones 25 in a 2801.
On Nov 26, 2007 9:52 AM, Patrick Diener <patrick.diener at gmail.com> wrote:
> you can add ephones up to the limit defined in max-ephone under
> telephony-service.
>
> So if you have the following cfg.:
>
> telephony-service
> max-ephones 24
>
> you will NOT be able to add ephone 25
> (same with SRST under call-manager-fallback)
>
> Regards
> Patrick
>
>
> On Nov 26, 2007 4:41 PM, zohaib shabir <zohaibshabir at gmail.com> wrote:
> > Dear All,
> > I have a situation in which I have to add more than 24 IP Phones in
> > 2801 .(The client has already purchased the router). I know that Cisco
> > Documentation says that we cannot add more than 24 IP Phones in CME or
> > SRST mode, but my question if I try to add more than 24 phones what
> > will going to happen. will the router deny me in adding more phones or
> > will i be able to add more than 24 phones in CME or srst.
> >
> > --
> > Regards,
> > Zohaib Shabir
> > Network Engineer(Voice)
> > DWP Group, TECH Division Karachi
> > Ph:+92-302-8232689
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
More information about the cisco-voip
mailing list