[cisco-voip] ata-186 - wall mountable?

[Lelio Fulgenzi]

Thanks....I've usually resorted to using screw mount cable ties....

http://www.tonesties.co.uk/eyelet_ties1.jpg

----- Original Message ----- 
From: "Robert" <rsingleton at morsco.com>
To: "Cisco VoIPoE List" <cisco-voip at puck.nether.net>
Sent: Monday, November 26, 2007 9:35 AM
Subject: Re: [cisco-voip] ata-186 - wall mountable?


> On Thu, 2007-11-22 at 11:21 -0500, Lelio Fulgenzi wrote:
>> Can anyone who has an ATA-186 handy tell me if it has those keyhole
>> hangers on the back that allow you to mount it to a wall?
>
> None that I have do.
>
> I have at least one ATA in each branch office dedicated to paging. This
> unit is often in an equipment room and what I've used pipe hanger strap
> to wall mount them. It is not very pretty, but it is effective, and
> since every branch is a plumbing supply store, it's always available on
> site :)
>
> http://plumbing.hardwarestore.com/52-342-galvanized-straps-and-hangers/pipe-strap-galvanized--608838.aspx
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>