[cisco-voip] Extension mobility call failure - Callmanager4.1.3

[Justin Steinberg]

Gotcha - that makes sense.

Well, you have two options.

1) upgrade to CM 4.2 or CM6 so you can do this the proper way by using
the hlog key (i would recommend this)
2) change your EM-A profile as follows:
Make the primary line the same DN and the same partition as Phone-A.
Add a secondary line to the EM-A profile with a new DN and a new
partition that previously did not exist.  Add this new DN and
partition to your line group.  Remove the original EM-A Dn from the
line group.
Don't add this new secondary line DN to Phone-A.

When the user is NOT logged in, he just sees phone A with one line.
When the user logs into EM, he sees phone A with two lines.  The first
line is the personal extension and the second line is the hunt group
calls.

HTH.

Justin

On Nov 28, 2007 3:42 AM, nenad lazarevic <nenad.l2005 at gmail.com> wrote:
> DN 54111 in EM-A profile belongs to Line Group and associated to Hunt List
> and Hunt Pilot for calls to certain part of Unit (Office) from PSTN. Line
> Groupe is for operators on duty.
>
>
> I need a solution for the situation described, not for the situation when DN
> 54111 belongs to partition P_E.
>
> Thx
>
>
>
>
>
> On Nov 28, 2007 12:51 AM, Justin Steinberg <jsteinberg at gmail.com> wrote:
>
> > i think the answer depends on what you are trying to achieve.
> >
> > why not change EM-A and place the associated DN 54111 into the same
> > partition (P_E) as Phone-A.
> >
> > I guess for one, I don't understand why you are logging in with an
> > extension mobility profile that has the same DN as the phone.
> >
> >
> >
> >
> > On Nov 27, 2007 5:49 PM, nenad lazarevic <nenad.l2005 at gmail.com> wrote:
> > > I have, Phone A with directory number DN:54111 (in partition P_E),
> Extension
> > > Mobility profile for phone A is EM-A with same number as default profile
> of
> > > phone A, but different Partition (partition P_Service) and Phone B with
> > > Directory Number DN in partition P_E:
> > >
> > > Phone-A, DN:54111:
> > > EM-A, DN: 54111:
> > > Phone-B, DN: 55555:
> > > Partition: P_E
> > > Partition: P_Service
> > > Partition: P_E
> > >
> > > Phone-A CallingSearchSpace: CSS_LD
> > > EM CallingSearchSpace: CSS_LD                    Phone-B
> CallingSearchSpace:
> > > CSS_LD
> > >                                               P_HeadOffice
> > > P_HeadOffice                                              P_HeadOffice
> > >                                               P_E
> > > P_E                                                           P_E
> > >                                               P_Service
> > > P_Service                                                   P_Service
> > >
> > > After logging with EM-A profile to phone A, user profile overwrite
> default
> > > device profile. Phone A after loging have same Directory Number (54111)
> but
> > > Partition is P_Service.
> > > Now I want  to call Phone A ( Directory Number:54111 P_Service, CSS_LD),
> > > from Phone-B (Partition P_E, CSS_LD) and I have call failure. I tryed to
> set
> > > CFNA on Phone A to the directory number of the default device profile
> (54111
> > > with CSS_LD) but I still have call failure. Solution is near me but I
> dont
> > > see, please help.
> > >
> > > _______________________________________________
> > > cisco-voip mailing list
> > > cisco-voip at puck.nether.net
> > > https://puck.nether.net/mailman/listinfo/cisco-voip
> > >
> >
>
>