[cisco-voip] Changing transfer settings in Unity Connection 1.2

[Pat Hayes]

I hate to be the bearer of bad news, but... I've got bad news. Bulk Edit 
(and Bulk Admin) were both written for UC 1.1, where there was only a 
single transfer rule, so they don't edit the other two. This is fixed in 
the 2.0 tools, but, word on the street is there is no intention of 
fixing this in the 1.x versions.

Also, FYI, if you do edit the one rule that you see in the tool, the 
changes will be applied to the alternate rule.

-------- Original Message  --------
From: "Patrick Mowry" <pmowry at getgds.com>
To: cisco-voip at puck.nether.net
Subject: Changing transfer settings in Unity Connection 1.2
Date: 11/27/2007 10:52 PM

> Hello,
>   I assume I'm just blind, but I'm trying to use the bulk edit tool to change call transfer settings.  I want to have calls transfered by the auto attendant to go directly to the users greeting during office hours, but ring there phone after hours.  I know that sounds backwards, but it's what I need to do.  I need to do this to about 900 of 1200 phones.
> 
> Thanks,
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip