[cisco-voip] Retrieve installed license for shipped CUC 6.x

[Erik Erasmus (E)]

As far as I know -- if you send cisco www.cisco.com/licence the mac
adress of the server or the PAK you should have received anyway with
your ccm order for the node licence they will send you an actual lic
file you can save. If this is 1005 the same as the pre-loaded one I am
not sure but I guss it does not really matter - in case you re-build
the file you receive should do the trick -- maybe someone else in the
group can confirm 



Erik Erasmus


-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Anthony
Kouloglou
Sent: Wednesday, November 28, 2007 2:49 PM
To: cisco-voip at puck-nether.net
Subject: [cisco-voip] Retrieve installed license for shipped CUC 6.x

Hi,
i have just received a new CUC 6.X. I continued the installation and 
when it finished i discovered:
1 node license and 50 units licenses that cisco have promised about
6.X 
versions.
How can i have the lic file so, i can use it in case of future 
reinstallation?

P.S. I have also ordered 100 units licenses. After i activate them and

get the lic file, when i install i will
have 100 units i guess and not 150. Isn't it so? :-)

Thnaks
Antonis


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This e-mail is subject to the Telkom SA electronic communication legal notice, available at :
http://www.telkom.co.za/TelkomEMailLegalNotice.PDF
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~