[cisco-voip] CCVP Lab Equipment

[TianLun Song]

i think you dont neet PRI emulators. you can connect two routers back to
back using PRI cables, then load CCME on one of the routers to simulate PSTN
networks

cheers


On 11/29/07, Syed Khalid Ali <Khalid_Khursheed at hotmail.com> wrote:
>
>  Hi to all,
>
> Currently I have CCM 4.1(3) running on vmware virtual machine (on Dell
> Optilex GX-270).  2611, 2651XM, 2821 routers.
> 2xFXO (for 2600 series). 2xFXS (2600 series). CCME 3.3. 1xPRI card(which
> is useless since no PRI lines to work with).
> 3xISDN BRI cards . 2-port ISDN BRI emulator. 1x  3560 24Port PoE EMI. 1x
> 3560 24Port EMI.
>
> Now my boss will be ordering NFR for security guys in January 2008 and
> asking me if any thing i need in lab.
> Should I include CCM 5.0 or CCM 6.0 software, which one is better. Also do
> I need to have an MCS server .
> Does CCM5/6  install and run without problems on vmware.
> And what about PRI emulators, Unity Express or Unity. Also Does Unity
> requires an MCS server to run.
>
>
>
>
>
> regards,
>
> syed khalid ali
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>



-- 
TianLun Song
CCVP, CCNP, M.Eng
Cell:1-416-829-3630
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20071129/725abaaf/attachment.html