[cisco-voip] R: CUCM 6.0.(1) Installation Problem

[Alessandro Bertacco]

Hi Wes,
 
So you think it will be an hardware misconfiguration problem?
 
Ok, i'll try with a server that match exatly the supported config.
 
Thank you very much
 
Alessandro

________________________________

Da: Wes Sisk [mailto:wsisk at cisco.com] 
Inviato: lunedì 1 ottobre 2007 23.21
A: Alessandro Bertacco
Cc: cisco-voip at puck.nether.net
Oggetto: Re: [cisco-voip] CUCM 6.0.(1) Installation Problem


verify your hardware matches the specified hardware buildout exactly.
http://www.cisco.com/en/US/products/hw/voiceapp/ps378/prod_brochure_list.html

/Wes

Alessandro Bertacco wrote: 

	Hi every one. 

	Have you ever had a problem during the CUCM 6.0.(1) DVD installation? The problem is that. 

	After the server DL 320 G2 boot up from the DVD drive of the CUCM 6.0.(1) System Disk, the system ask me to configure all requested parameter, Ip address, NTP, ecc...the installation should begin, but, Xserver windows appear and I see a Red Hat Enterprise installation ask me the partition configuration of the HardDrive, after that the installation show me a unrecoverable error and stop.

	Any idea??? 

	Thank you very much 



	Alessandro Bertacco
	Network Engineer 
	alessandro.bertacco at lanservice.it <mailto:alessandro.bertacco at lanservice.it>  
	



	
________________________________


	_______________________________________________
	cisco-voip mailing list
	cisco-voip at puck.nether.net
	https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20071002/123f1801/attachment.html