[cisco-voip] 7961 ring volume

[Patrick Diener]

you can use ip phone xml and the built in web server of the ip phones
to post (HTTP POST) a (or several) CiscoIPPhoneExecute XML Object with
ExecuteItem Key:VolDwn to the phones...
it will look like a ghost is pressing the volume key on the phone ;-)

It's a bit cumbersome but it works!

here some more info:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_programming_usage_guide_book09186a00807a34b9.html

Regards
Patrick

On 10/3/07, Jason Aarons (US) <jason.aarons at us.didata.com> wrote:
>
>
>
>
> Customer wants me to force the ring volume of all phones lower, I don't
> think it's possible..
>
>
>
> "Is it possible for the default ringer and speaker volume to be lower? "
>
>
>
>
>
>
> ________________________________
>
>
>
>
>  Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee, you
> are hereby notified that you have received this communication in error and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this communication in
> error, please notify us immediately by replying to this message and deleting
> it from your computer. Thank you.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>