[cisco-voip] anyone using Exchange 2007 UM?

[Jake Doe]

First, you need to configure Media Termination Point
(MTP) resources.  Second, make sure you check the
Media Termination Point Required checkbox on your SIP
trunk configuration.  After that, then the transfers
should work (including iDivert).

--- Scott Voll <svoll.voip at gmail.com> wrote:

> the *extension works fine ..... it's the "transfer"
> *extension "transfer"
> that does not work fine.  Try that and let me know.
> 
> Scott
> 
> 
> On 10/3/07, Jonathan Charles <jonvoip at gmail.com>
> wrote:
> >
> > I have it working at home (in a test environment)
> works fine...
> >
> > My star+extension xfer to vmail works fine... Did
> you set the mask
> > correctly so it doesn't send the star?
> >
> >
> >
> > Jonathan
> >
> > On 10/2/07, Scott Voll <svoll.voip at gmail.com>
> wrote:
> > > I've had a TAC case open for weeks and I'm not
> getting anywhere.
> > >
> > > does anyone have exchange 2007 working as there
> Unified messaging?
> > >
> > > All works great except I setup the
> star+extension to go directly to
> > VM.  The
> > > problem is when you try to transfer someone to
> star+extension the call
> > > drops.  Anyone seen this?
> > >
> > > CM 5.1.2
> > >
> > > Thanks
> > >
> > > Scott
> > > _______________________________________________
> > > cisco-voip mailing list
> > > cisco-voip at puck.nether.net
> > >
> https://puck.nether.net/mailman/listinfo/cisco-voip
> > >
> >
> > _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip



       
____________________________________________________________________________________
Be a better Globetrotter. Get better travel answers from someone who knows. Yahoo! Answers - Check it out.
http://answers.yahoo.com/dir/?link=list&sid=396545469