[cisco-voip] SIP Addressing Change

[STEVEN CASPER]

I am trying to implement a SIP trunking test with a carrier. I am sending them 
 
 From: "Cisco Test One" <sip:5422137 at 10.x.x.33> ( mailto:14104541137 at 10.99.0.33> ). 
 
They want to see
 
 From: "Cisco Test One" <sip:5422137@ ( mailto:14104541137 at 10.99.0.33> )test.ipttrunk.com> 
 
Is there a way to make this change on the router or Call Manager? The gateway is set up in Call Manager as a H323 gateway.
 
 
 
 
Thanks,

Steve Casper
Voice Technologies
M&T Bank
(410) 347-6026

************************************
This email may contain privileged and/or confidential information that is intended solely for the use of the addressee.  If you are not the intended recipient or entity, you are strictly prohibited from disclosing, copying, distributing or using any of the information contained in the transmission.  If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy.  This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act and the Sarbanes-Oxley Act.  You may not directly or indirectly reuse or disclose such information for any purpose other than to provide the services for which you are receiving the information.
There are risks associated with the use of electronic transmission.  The sender of this information does not control the method of transmittal or service providers and assumes no duty or obligation for the security, receipt, or third party interception of this transmission.
************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20071004/4e58c13a/attachment-0001.html