[cisco-voip] CCME 4 + CUE 3 networking

[Jonathan Charles]

On your remote CME, create an H.323 Dial Peer for Vmail to go to the
remote CUE... then the SIP dial peer on that router will take care of
it.

For MWI, you may be screwed, cuz you can't have multiple MWI ons and offs...



Jonathan

On 10/5/07, Paul Choi <asobihoudai at yahoo.com> wrote:
> Is it possible to have remote CCME 4.0 users use a CUE
> 3.0.1 module on a remote box across the WAN? It sounds
> slightly complex since MWI signals must be configured
> as well as DSPs for transcoding G.711 -> G.729. I
> can't find in the documents whether this is possible
> or not.
>
> Paul
>
>
>
> ____________________________________________________________________________________
> Yahoo! oneSearch: Finally, mobile search
> that gives answers, not web links.
> http://mobile.yahoo.com/mobileweb/onesearch?refer=1ONXIC
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>