[cisco-voip] 79x0 vs 79x1 (BLF?)

[Jason Aarons (US)]

Customer has all SCCP 79x0s with CCM 5.1 and are asking for a button to
have "auto dial and appearance", they have been using the 7940 a week,
along with CCMUser and don't think AbbrDial/FastDials/Personal Directory
meets their needs. Their old phone had lots of buttons, etc.

What is the CallManager 5.1 feature called where a button can be both a
Shared Line and Speed Dial?  I'm trying to find the URL if it requires a
79x1 or would it work with a 7960.

What are the caveats? Can they setup/manage via CCMUser? 

I've been stuck on 4.1 a long time and recall seeing something about
this in 5.x, but can't find the details.  I know 4.1 you could have
either a shared line or a speed dial but not both.

 -jason

 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20071008/21e11b7f/attachment.html