[cisco-voip] H323 port list

[Scott Voll]

Thanks.... I was looking for the trunk group command.....

Scott


On 10/11/07, CarlosOrtiz at bayviewfinancial.com <
CarlosOrtiz at bayviewfinancial.com> wrote:
>
>
> I have used trunk groups for PRI but not FXO.  I believe that others on
> the list have mentioned it can be done with FXO as well.  Did you check the
> archives?
>
> Carlos
>
>
>   *"Scott Voll" <svoll.voip at gmail.com>*
> Sent by: cisco-voip-bounces at puck.nether.net
>
> 10/11/2007 03:12 PM
>    To
> "cisco voip list" <cisco-voip at puck.nether.net>  cc
>   Subject
> [cisco-voip] H323 port list
>
>
>
>
> How do you setup a H323 VGW that has 12 FXO into a list so you don't have
> to make a dial peer for each port?
>
> Thanks
>
> Scott
>
>  _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20071011/36a4a4b8/attachment.html