[cisco-voip] Triple Unity servers...

[Jonathan Charles]

Well, those are the questions:

A: How is this done, if it can be done at all.

B: Would TAC support afterwards.


Jonathan

On 10/15/07, Aman Chugh <aman.chugh at gmail.com> wrote:
> Not Sure if this would be a supported TAC deployement.
>
> I am thinking that you can run the unity setup and enable TTS setting only
> on the third box but It would be interesting to learn if three unity servers
> can exist toegther in the failover setup.
>
> Do let us know what happens next !
>
> Aman
>
>
> On 10/15/07, Jonathan Charles <jonvoip at gmail.com> wrote:
> >
> > So, I have to do this on Tuesday, and was wondering if anyone had any
> ideas...
> >
> > The plan is to install the primary and secondary Unity servers without
> > TTS and then run the Failoverconfig.exe to mate them together...
> > Pretty simple (I hope).
> >
> > The question is about this third Unity server, the dedicated TTS
> > box... how do I link that to the Unity twins?
> >
> > Not finding a lot of love on Cisco's website here... (no mention
> > anywhere of the concept of a dedicated TTS box)...
> >
> >
> >
> >
> > Jonathan
> >
> > On 9/19/07, Jonathan Charles < jonvoip at gmail.com> wrote:
> > > Cust ordered 3 Unity servers, a  primary, a secondary and a dedicated
> TTS box.
> > >
> > > Not sure how to install the TTS box. Do I set it up normally (SQL,
> > > Exchange tools, etc.) and then install Unity but only select TTS (and
> > > not select Unity)?
> > >
> > > Also, would I NOT select TTS on the two primaries?
> > >
> > > Just curious, I didn't sell this monster...
> > >
> > >
> > >
> > >
> > >
> > > Jonathan
> > >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
>
>