[cisco-voip] from the Newbie

[Ed Leatherman]

If you just want to look at a config, i think you could use a TFTP client
issue a reguest for one as if you were a phone, rather than changing any
params in CCM.

example in windows:
C:\>tftp 10.0.0.2 GET SEP000F3487EA29.cnf.xml


On 10/16/07, Kevin Dunn <cheesevoice at gmail.com> wrote:
>
> So I am curious bynature, and just starting my CCVP training.  So some of
> my questions will fall in the "WTF" category...
>
> For example.  I am on the CCM (4.2) Publisher (we have a pub and one sub)
> and I thought it would be cool to look at my phones config file.
>
> So I went to C: Program Files>Cisco>TFTPPath (where the load files and bin
> files are all at) butI saw no SEP(MAC).cnf.xml files.  So i thought maybe I
> am not looking in the right spot, and I searched the hard drives for
> .cnf.xml  and I found nothing.
>
> If you could be so kind as to point me in the right direction...
> Yes I SHOULD be reading my CVOICE books but this is bugging the crap out
> of me.
>
> Thanks guys
>
> Kevin
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>



-- 
Ed Leatherman
Senior Voice Engineer
West Virginia University
Telecommunications and Network Operations
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20071016/b04f0d59/attachment.html